Figure 36. Installing Hard Drive Into Carrier; Figure 37. Install Drive Assembly Into The Server System - Intel SERVER SYSTEM SR2500AL User Manual

9. With the black lever in the fully open position, slide the drive assembly into the
server system. The green latch at the front of the drive carrier must be to the right.
Do not push on the black drive carrier lever until the lever begins to close by itself.
10. When the black drive carrier lever begins to close by itself, push on it to lock the
drive assembly into place.
11. Install the server system cover. For instructions, see
Cover".
12. (Optional) Install the front bezel. For instructions, see
13. Plug all peripheral devices and the AC power cable(s) into the server.
46
A

Figure 36. Installing Hard Drive into Carrier

Figure 37. Install Drive Assembly into the Server System

B
B
"Installing the Server System
"Installing the Front
Intel® Server System SR2500AL User's Guide
B
TP02143
A
TP02144
Bezel".