Figure 48. Installing Power And Sata Cables (Active Mid-Plane Installed) - Intel SERVER SYSTEM SR2500AL User Manual

6. The sixth hard drive kit comes with a power cable and two SATA cables. Cabling
for the sixth hard drive varies depending on which mid-plane you have in your
system. If you have an active mid-plane in your system, go to step 7 for cabling
instructions. If you have a passive mid-plane in your system, go to step 8 for
cabling instructions.
7. If you have an active mid-plane in your system, install the power cable to the
backplane and the sixth HDD board (see letter "A"). Install the short SATA cable to
the backplane and the sixth HDD board (see letter "B"). Proceed to step 9.

Figure 48. Installing Power and SATA Cables (Active Mid-Plane Installed)

Note: You will not use the long SATA cable from the 6th HDD kit in a system with an active mid-
plane.
Intel® Server System SR2500AL User's Guide
A
B
AF002122
55