Installing A Pci Riser Card; Figure 54. Installing Pci Riser Card Into The Server System - Intel SERVER SYSTEM SR2500AL User Manual

Installing a PCI Riser Card

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Remove the processor air duct. For instructions, see
Duct".
5. Disconnect any cables attached to any add-in cards.
6. Remove the PCI riser assembly. For instructions, see
Assembly".
7. Remove any add-in cards from the PCI riser connector. For instructions, see
"Removing a PCI Add-in
8. Press the hold the blue riser locking lever (see letter "A" in the figure below).
9. Place riser connector onto retention pins.
10. Slide the riser connector to the left of the riser module to lock it into place (see
letter "B" in the figure below).
11. Release the blue locking lever.
62
Card".

Figure 54. Installing PCI Riser Card into the Server System

A
B
Intel® Server System SR2500AL User's Guide
"Removing the System
"Removing the Processor Air
"Removing the PCI Riser
AF000147
"Safety