Installing And Removing The Rack Handles; Installing The Rack Handles; Figure 88. Installing A Fan Into The Fixed Fan Module - Intel SERVER SYSTEM SR2500AL User Manual

8. Install the fan module assembly. For instructions, see
9. Install the server system cover. For instructions, see
Cover".
10. Plug all peripheral devices and the AC power cable(s) into the server.

Installing and Removing the Rack Handles

Installing the Rack Handles

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Align the rack handle with the two holes on the side of the server system as shown
in the figure below.
5. Attach the rack handle to the server system with two screws as shown in the figure
below.
98

Figure 88. Installing a Fan into the Fixed Fan Module

A
"Replacing a Fan
"Installing the Server System
"Removing the System
Intel® Server System SR2500AL User's Guide
Module".
"Safety