6. Install the server system cover. For instructions, see
Cover".
7. Install the front bezel. For instructions, see
8. Plug all peripheral devices and the AC power cable(s) into the server.
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the front bezel if it is installed. For instructions, see
Bezel".
4. Remove the server system cover. For instructions, see
Cover".
5. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in the figure below.
Intel® Server System SR2500AL User's Guide
Figure 89. Installing the Rack Handle
AF000019
"Installing the Server System
"Installing the Front
Bezel".
"Removing the Front
"Removing the System
"Safety
99