Installing The I/O Expansion Module(S); Figure 57. Installing The I/O Expansion Module To The Server Board - Intel SERVER SYSTEM SR2500AL User Manual

Installing and Removing the I/O Expansion
Module(s)

Installing the I/O Expansion Module(s)

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Remove the PCI riser assembly. For instructions, see
Assembly".
5. Squeeze the sides of the I/O expansion module cover(s) to disengage it from the
server system back panel and remove it. See letter "A" in the figure below.
6. Attach the standoffs to the server board (see letter "B" in the figure below) and
attach the I/O expansion module(s) to the server board (see letter "C" in the figure
below).

Figure 57. Installing the I/O Expansion Module to the Server Board

7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser
8. Install the processor air duct. For instructions, see
Duct".
9. Install the server system cover. For instructions, see
Cover".
10. Plug all peripheral devices and the AC power cable(s) into the server.
66
A
Assembly".
"Removing the System
"Removing the PCI Riser
I/O Module
(Dual Gigabit)
I/O Module
(External SAS)
B
C
"Installing the Processor Air
"Installing the Server System
Intel® Server System SR2500AL User's Guide
"Safety
AF000740