4. Remove the system's cover. For instructions, see
5. Remove the processor air duct. For instructions, see
Duct".
6. Remove the heat sink, if installed.
7. Locate the processor socket and raise the socket handle completely (see
8. Raise the CPU load plate (see
Note: Do not touch the socket pins; they are very sensitive and easily damaged.
9. Line up the alignment marks on the processor and the socket, and insert the
processor into the socket.
Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
34
Figure 22. Lifting the Processor Socket Handle
Figure
A
Figure 23. Installing the Processor
"Removing the System
"Removing the Processor Air
AF000176
23).
B
®
Intel
Server System SR2520SA User's Guide
Cover".
Figure
22).
AF000177