Removing The I/O Expansion Module(S); Figure 58. Removing The I/O Expansion Module(S) From The Server Board - Intel SERVER SYSTEM SR2500AL User Manual

Removing the I/O Expansion Module(s)

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Remove the PCI riser assembly. For instructions, see
Assembly".
5. Remove the I/O expansion module(s) from the server board (see letter "A" in the
figure below).
6. Remove the standoffs from the server board (see letter "B" in the figure below).
7. Install the I/O expansion module cover(s) into the system back panel (see letter "C"
in the figure below).

Figure 58. Removing the I/O Expansion Module(s) from the Server Board

8. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser
9. Install the processor air duct. For instructions, see
Duct".
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable(s) into the server.
Intel® Server System SR2500AL User's Guide
B
A
Assembly".
"Removing the System
"Removing the PCI Riser
C
AF000743
"Installing the Processor Air
"Installing the Server System
"Safety
67