Peripheral Devices; Hard Disk Drives; Figure 15. Optional Peripherals - Intel SERVER SYSTEM SR2500AL User Manual

Peripheral Devices

The server system provides locations and hardware for installing hard drives, a USB
floppy drive, CD-ROM drive, or DVD-ROM drive. The drives must be purchased
separately. The following figure shows the available options.
.

Hard Disk Drives

The server system ships with five drive carriers for installing five SAS or Serial ATA
(SATA) hot-swap drives.
Note: SAS drives are supported on the Intel
One left drive bay can be converted to be used as a floppy bay. To use the bay for a floppy
drive, the AXXFLOPHDDTRAY accessory kit must be used.
For instructions on installing hard drives, see
Drive".
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45C.
Note: The Intel
does not support all SAS or Serial ATA (SATA) hard drives. See
References"
22
A
E
A. Slimline Optical Drive Bay
B. Tape Drive Filler Panel
C. 6th HDD or Tape Drive Bay (Optional)
D. Hard Disk Drive Bays
E. HDD to Floppy Drive Conversion (Optional)

Figure 15. Optional Peripherals

®
Server System SR2500ALLX and/or the Intel
for an Internet link to a list of supported hardware.
B
D
®
Server System SR2500ALLX/SR2500ALLXR only.
"Installing and Removing a Hot-swap Hard
®
Server System SR2500ALBRP
Intel® Server System SR2500AL User's Guide
C
TP02126
"Server System