Installing The Processor; Figure 16. Lifting The Processor Socket Handle; Observe The Safety And Esd Precautions At The Beginning Of This Book. See Information" On Page; Power Down The Server And Unplug All Peripheral Devices And The Ac Power Cable - Intel R1304BTSSFAN Service Manual

Installing the Processor

To install a processor, follow these instructions:
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Remove the server system cover. For instructions, see
System Cover" on page
4. Locate the processor socket and raise the socket handle completely. See
5. Push the rear tab with your finger to slightly lift the front of the load plate. Raise the
load plate completely. Raise the CPU load plate (see
36
iii.
28.

Figure 16. Lifting the Processor Socket Handle

®
Intel Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
"Removing the Server
A
B
AF003186
Figure 17).
"Safety
Figure 16.