Figure 51. Removing Pci Riser Assembly From The Server System - Intel SERVER SYSTEM SR2500AL User Manual

3. Remove the server system cover. For instructions, see
Cover".
4. Remove the processor air duct by lifting straight up.
5. Disconnect any cables attached to any add-in cards.
6. Grasp both riser latches with thumb and forefinger (see letter "A"), and pull up to
release riser assembly.
7. Lift riser assembly straight up (see letter "B").

Figure 51. Removing PCI Riser Assembly from the Server System

8. If you need to add or replace a PCI add-in card, see
Add-in
9. If you need to add or replace a PCI riser connector, see
Card".
10. If you removed the PCI riser assembly for another procedure, continue with that
procedure.
58
Card".
"Removing the System
A
B
TP02145
"Installing and Removing a PCI
"Replacing a PCI Riser
Intel® Server System SR2500AL User's Guide