Table of Contents
Advertisement
When the message [REPLACE WIPER] is displayed
[STATION]-[WIPER EXCHANGE]
The wipers are consumable parts. When the following message is displayed, replace the wipers with
new ones.
At the same time, clean the ink at the bottom of the slider.
• The wiper is optional supply which does not come with the machine.
• Do not push the [ENTER] key other than the case of replacing wipers.
The number of wiper operations that is counted in the Device will be reset.
Do not select [REPLACE WIPER] unless the wiper is to be really changed.
STEP
1
Select the [WIPER EXCHG], and then the car-
riage will come out of the capping station.
2
Open the front cover, then change the wiper.
3
Holding the projections at both ends, draw out
the wiper.
Use the gloves that are supplied with the separately-available
cleaning wiper to protect your hands from stains.
4
Holding the projections at both ends, insert a
new wiper into place.
< LOCAL >
REPLACE WIPER
- 5.5 -
STATION
MENT
: WIPER EXCHG
Advertisement
Table of Contents
