Table of Contents
Advertisement
Medium
•
If medium that is likely to tightly
curl, flatten first the paper
before using it for printing.
Heavily-curled medium affect
the plotted result.
Locking the casters
•
Make sure to lock the casters
before starting job. If the
device performs plotting without
the casters locked, the device
can move out of position.
Ink cartridges
•
If the ink cartridge is moved from
a cold place to a warm place,
leave it in the room temperature
for three hours or more before
using it.
•
Open the ink cartridge just
before installing it in the plotter.
If it is opened and left for an
extended period of time, normal
printing performance of the
plotter may not be ensured.
•
Make sure to store ink cartridges
in a cold and dark place.
•
Be sure to thoroughly consume
the ink in the ink cartridge, once
it is opened, within three months.
If an extended period of time has
passed away after opening the
cartridge tank, printing quality
would be poor.
CAUTION
•
You cannot use any other ink type
than the exclusive one.
•
Never refill the ink cartridge with
ink.
•
Neither pound the ink cartridge nor
shake it violently so as to prevent
leakage of ink.
•
Do not touch or stain the contacts
of the ink cartridge as doing so
may cause damage to the print
circuit board.
Warning labels
•
This device is adhered with a
warning label at two locations.
Be sure understand firmly the
warnings given on the labels. In
the case where any of the
warning label has become so
soiled that the warning message
is illegible or has come off,
purchase a new one from your
local distributor or our office.
Refer to Appendix for the label
adhering locations.
- ix -
Advertisement
Table of Contents
