Table of Contents
Advertisement
Turning the power off
When plotting is completed, press the power switch on the front face to turn the power off.
To turn the power off, check first whether or not there is data received and there remains data that
has not yet been output in the device.
Also make sure that the head rests at the capping station.
• Do not turn off the main power switch on the rear face. The power is turned
on periodically and the nozzle clogging preventive function is activated.
(Flashing)
If the main power switch is turned off, the nozzle will be clogged. Repair by
service personal is required.
• Leave the front cover closed. If it is open, the nozzle clogging preventive
function is not activated.
• If the power switch is turned off, the exhaust fan of the device stops. For
ventilation, do not turn off the power switch immediately after plotting.
• If the power is turned off while the device is engaged in plotting, the head
may fail to be retracted in the capping station. If the head is left without
capped for an extended period of time, the nozzle will be clogged with dust.
If the power to the device is turned off without the head capped, return on
the power to the device.
1. Turn off the power to the device.
The POWER indicator on the operation panel goes off.
- 2.29 -
Advertisement
Table of Contents
