Table of Contents
Advertisement
Features
The features of the device are described below. Together with the method of operation of the device
explained in this manual, they help you understand how to use the device properly.
Newly developed high-reliability high-coloring solvent ink
The newly developed solvent ink allows the use of raw tarpaulin or other commercially available
media, realizing high quality plotting with a low running cost.
This ink has a high water resistance and high weather resistance.
(No lamination is required, and the outdoor durability in weather-resistance is up to 3 years.)
True 720dpi high quality plotting
Plotting with 720dpi high quality is suitable both for small and large posters.
Intelligent heater
Mounts two heaters (preheater and print heater) with independent temperature setting and intelligent
functions (standby mode and automatic off),
The device detects the ambient temperature to perform temperature control, allowing heating tem-
perature setup which best suits the medium used.
Easy ink replacement
The ink cartridge can be replaced safely and easily without getting your hands dirty.
Easy maintenance
The automatic capping system allows not to wash the Heads the need of head cleaning before turning
off the power.
Nozzle clogging can be recovered by performing the cleaning function.
If the device is not in use for a prolonged period of time, it automatically performs Nozzle-clogging
preventive operation at fixed intervals. However, the main power must be left turned on.
The device monitors the time period when not in use. When the power is turned on or when plotting is
started, it automatically performs head cleaning to prevent from clogging Nozzle.
Standard device for exhausting gases
The device is provided with the stand exhauster which forcibly discharges air through the duct to the
exhaust vent on the front and rear sections.
This helps to reduce the smell of ink in the room.
- ii -
Advertisement
Table of Contents
