Table of Contents
Advertisement
6. Insert the right-hand roll holder into the core of
the roll medium.
After inserting the roll holder completely into the core of the
roll medium, fix it with the screw.
7. Pull out the roll medium from the back of the
device until it reaches the end of the platen.
8. Insert the roll medium that has been pull out
between the platen and the pinch rollers and
pull it to the front of the device.
9. Push the clamp lever at the back of the device.
The clamp lever on the front face is lowered to hold the
medium. (for temporary setting)
- 2.11 -
Advertisement
Table of Contents
