Table of Contents
Advertisement
Setting exhaust fan
The following sets up the rotational operation of the exhaust fan which lets out the order of ink.
STOP TIME
Stops rotation of the exhaust fan at the specified period of time interval after plotting.
CONT. :
0- 240 min
RENEW
Selects the current status of the exhaust fan.
(HIGH, LOW, OFF)
Rotates the fan at a HIGH speed.
Set up the period of time after plotting when the fan is to be sopped. When the plotter
starts operation, the fan starts rotation accordingly. (During plotting, the fan is rotating
at a high speed.)
- 4.11 -
Advertisement
Table of Contents
