Table of Contents
Advertisement
Check warning of white nozzle status (Only when using SS21 white ink)
As SS21 white ink is easier to cause nozzle clogging compared to other ink, you must keep the nozzle
status normal even when you do not discharge it.
In order to keep the nozzle status normal, this machine displays the
warning message in the right once a fortnight
The warning message will be displayed after the media detection is performed.
When the warning message is displayed, perform the following:
1
When the warning message is displayed,
press the
• The machine enters into the waiting for test printing status.
2
Press the
3
Press the
• Print the test pattern.
• After the warning message is displayed, when you perform "Perform test printing with the test
pattern for checking white ink"(
Function"(
• When the warning message is displayed, you can cancel it by pressing the
However, after the next media detection is performed, the warning message will be displayed
again.
• The warning message is displayed only when performing media detection in the printing
mode.
*1. A fortnight after clearance of the warning message or maintenance of the white ink.
*1
.
key.
key to select the type of the test printing.
key.
the previous page) or "White Ink Maintenance
P.4-37), the warning will be released.
Test printing
C h e c k
t h e
" W " n o z l l e
c o n d i t i o n .
< E N T >
T ES T PR I N T
( WH I T E CHK . )
< EN T >
key.
2-23
2
Advertisement
Table of Contents
