Table of Contents
Advertisement
Cleaning the station interior [STATION]-[CARRIAGEout]
Move the carriage when cleaning the station interior and replacing the consumable parts.
• Do not move the carriage out of the capping station by hand.
Use the appropriate operation key to move the carriage.
For the [STATION] function, there are two following items.
CARRIAGEout
WIPER EXCHANGE : When the message [REPLACE WIPER] is displayed, replace the
NOZZLE WASH
STEP
1. Select [CARRIAGEout], and then carriage
moves out.
2. Open the front cover, then perform the follow-
ing maintenance works for the station interior.
1.
Cleaning the ink caps
Remove ink with a cotton swab from the rubber mounted around the cap.
2.
Cleaning the wiper
Take out the wiper and then wipe out ink with cotton buds.
3.
Cleaning the wiper cover
Wipe off ink to the ceiling of the wiper cover using cotton buds.
3.
Replacing the cutter blade
The cutter blade is a consumable part. When the cutter blade has become blunt, replace it with a new one.
page 5.23
: Move the carriage for maintenance of the station interior.
wiper.
page 5.5.
: Clean the nozzle using the cleaning kit.
- 5.4 -
page 3.7
STATION
MENT
: CARRIAGEout
page 3.4.
page 3.4.
page 3.4.
Advertisement
Table of Contents
