When The Message [Replace Wiper] Is Displayed; [Station]-[Wiper Exchange] - MIMAKI JV3-250 SP Operation Manual

When the message [REPLACE WIPER] is displayed

[STATION]-[WIPER EXCHANGE]

The wipers are consumable parts. When the following message is displayed, replace the wipers with
new ones.
At the same time, clean the ink at the bottom of the slider.
STEP
1 Select the [WIPER EXCHG], and then the car-
riage will come out of the capping station.
2 Open the front cover, then change the wiper.
3 Holding the projections at both ends, draw out
the wiper.
Use the gloves that are supplied with the separately-available
cleaning wiper to protect your hands from stains.
4 Holding the projections at both ends, insert a
new wiper into place.
Downloaded From ManualsPrinter.com Manuals
< LOCAL >
REPLACE WIPER
• The wiper is optional supply which does not come with the machine.
• Do not push the [ENTER] key other than the case of replacing wipers.
The number of wiper operations that is counted in the Device will be reset.
Do not select [REPLACE WIPER] unless the wiper is to be really changed.
STATION
MENT
- 5.5 -
: WIPER EXCHG