Table of Contents
Advertisement
MARGIN
This function sets a dead space to increase/decrease the right and left margins of the medium.
The function is used to increase the margin for binding.
You can set a dead space for each of the right and left margins of the medium.
(-10-85 mm)
COLOR PATTERN
Plots a color pattern at the right end of the medium. Nozzle clogging can be checked during
plotting.
The color pattern is plotted in the 18 mm area from the origin. The plotting area becomes
smaller. Therefore, when plotting is made all the way to both ends of the medium, turn this
function off.
REFRESH
Solidification of ink can be prevented by refreshing the head during plotting.
If this function is executed in a dusty place or dry place, ink in the head will be likely to solidify.
A larger level results in more number of refreshes.
(LEVEL0-3)
MEDIA SET
This function sets the method of medium detection.
SELECT :
During the initial operation, the device displays a menu for selection of "roll medium"
or "cut sheet medium".
When "roll medium" is selected, only the width of the medium is detected. When "cut
sheet medium" is selected, both the width and length of the medium are detected.
WIDTH :
Select this method when a roll medium is used.
Only the width of a medium will be detected.
When the medium is set and the clam lever is pushed up, the device detects only the
medium width automatically.
DATA
18 mm
- 4.8 -
Origin
Advertisement
Table of Contents
