Table of Contents
Advertisement
Drawing setup conditions [LIST]
This function outputs the current settings of the device.
They are useful in carrying out maintenance of the device.
1.
SET UP
2.
PRINTadjust
REPLACE COUNTER : Indicates the number of times the ink cartridges are replaced.
3.
4.
VERSION
5.
PARAMETER
: Indicates a value that is specified with the FUNCTION.
: Indicates a correction value for dot position.
: Indicates the version of the firmware and memory capacity of the device.
: Used for service persons for maintenance.
- 5.18 -
Advertisement
Table of Contents
