Configuration And Function; The Front - MIMAKI JV3-160S Operation Manual

Configuration and function

The Front

14
11
Name
1 Front cover
2 Carriage
3 Operation panel
4 Capping station
5 Clamp lever
6 Heater operation panel
7 Power switch
8 Waste ink tank
9 Stand
10 Take-up device
11 Voltage selector switch
12 Platen
13 Printer heater
14 Front exhauster
13
12
It is opened when setting medium or taking a corrective measure against
a medium jam. Even if the power switch is off, keep the front cover
closed to perform the ink clogging preventive operation.
Moves the print head from side to side.
This panel has the operation keys required for operating the device and
the LCD for displaying set items, etc.
Incorporates the ink cap to be capped on the head and the wiper, etc.
It is made to go up-down the pinch roller for holding medium.
Provides the heater power switch and the heater status LED indicator.
It turns on/off the power to the device.
When the power switch is turned on, the POWER indicator lights in
green. While the main power switch is on, the ink clogging preventive
operation is performed periodically even if the power switch is off.
(Flashing)
Waste ink gathers in this tank.
It supports the main unit. It is provided with casters that are used to
move the device.
It supports to wind up the roll medium printed.
Switches between 100-120 V and 220-240 V according to the power
voltage used.
It puts out the medium as it is plotted on.
Fixes and dries printing ink. ( Attached inside the platen )
Discharges plotting smell from the medium to out of the room.
1
Function
- 1.4 -
2
3
4
5
6
7
8
9
10