Table of Contents
Advertisement
Carriage
The carriage is provided with ink heads for printing, a cutter unit for cutting off medium, etc. It is
also provided with a lever for adjusting the head height according to the thickness of the medium
used.
Heater
The platen has heater built-in for printing and preprinting.
The preheater preheats the medium before plotting to prevent rapid temperature change at the
printing section. The print heater improves the plot quality and dries ink after printing.
• While the heater is heating, the platen is very hot. When opening the front
cover or replacing the medium, lower the heater temperature and wait until
the platen temperature drops. Doing so while the platen is hot may cause
burn.
• When replacing the medium with a thin one, lower the heater temperature
and wait until the platen temperature drops. Doing so while the platen is hot
may cause the medium to stick to the platen or cause wrinkles or curls of
the medium.
Cutter Unit
- 1.8 -
Adjusting lever
Advertisement
Table of Contents
