If Image Quality Declines; While Lines/Thin Spots Are Obvious Or Dark Stripes Occur (In The Direction Of Travel Of The Head); Characters Fluctuate Doubly Or Triply Into Paper Feed; Displacement Is Observed Between Outward And Inward Printing - MIMAKI JV3-160S Operation Manual

If image quality declines

Corrective measures against troubles in the case where satisfactory image quality is not provided are
described in this station.
Take measures in accordance with actual state of the picture.
If the measures fail restore the device to the normal state, contact your local MIMAKI distributor or
MIMAKI office call for service.
While lines/thin spots are obvious or dark stripes occur (In the direction of travel of the
head)
Corrective measure :
Corrective measure :
Corrective measure :
Corrective measure :

Characters fluctuate doubly or triply into paper feed

Corrective measure :

Displacement is observed between outward and inward printing

Corrective measure :

The respective color ink injected by the respective color heads do not properly overlap

Corrective measure :

Large ink drop on medium

Corrective measure :
Execute the head cleaning.
Clean the interior of the station.
page 3.4 through 3.7, 5.10
Conduct the [MEDIA COMP.] function.
If slip of paper is present in the head path, for example,
above the media plate, remove it.
Conduct the [MEDIA COMP.] function.
Adjust "Y (outward and inward)" in [PRINT ADJUST]
function. page 5.9
Conduct the [PRINT ADJUST] function.
1. Execute the wiper cleaning.
2. Execute the ink caps cleaning.
3. Execute the head cleaning [normal].
- 6.4 -
page 2.21
page 2.22
page 2.22
page 5.9
page 3.4
page 3.4
page 2.21