Table of Contents
Advertisement
The medium sensor
The medium sensors detects the presence of the medium and the medium length.
There is a medium sensors on the platen.
• Set up medium to cover medium sensor at the back side of platen absolutely.
If the part of medium is not on medium, the medium con not be detected.
Cutter blade and cutting line
The carriage is provided with a cutter unit for cutting off the medium that has been plotted on.
The cutting line along which to cut off the medium is shown below.
"Cutting by Hand" (page 2.26) "Automatic Cutting [AUTO CUT]" (page 4.7).
Cutter blade
Medium sensor
Cutting Line
Cutting line
- 1.10 -
Advertisement
Table of Contents
