Table of Contents
Advertisement
When the message [Replace Wiper] is displayed [WiperExchng]
The wipers are consumable parts. As the wiper continues cleaning the head, it gets stained with ink
and dust. When the message [Replace Wiper] is displayed, replace the wiper with a new one without
delay. When replacing the wiper, remove ink adhered at the bottom surface of the slider.
• The wiper is separately available from your local distributor or our office.
The message [Replace Wiper]
The device counts the number of times the wipers are cleaned and tells when to replace them. When
the message [Replace Wiper] is displayed on the LCD, replace the wipers with new ones.
• The message [Replace Wiper] is displayed while the device is in operation
or when the device power is switched on.
When the message is displayed, replace the wipers with new ones.
• Do not select [Replace Wiper] unless the wiper is to be really changed.
The number of wiper operations that is counted in the Device will be reset.
STEP
1. Put the device into the MAINTENANCE mode.
(Refer to Page 3.13)
2. Press [ENTER] key.
3. Press [ENTER] key to select [Station].
4. Press [ ] and [ ] key until the display gives
the indication [WiperExchng].
5. Press [ENTER] key.
The carriage come out on the belt.
Wiper
Replace Wiper
- 3.17 -
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
Station Maint
Sel
: CarriageOut
Station Maint
Sel
: WiperExchng
Advertisement
Table of Contents
