Moving The Device - MIMAKI JV3-160S Operation Manual

Large format printer
Table of Contents

Advertisement

Moving the device

• When moving the device to a different place, contact local representative of
Mimaki Engineering. If you move it, failure of damage may occur.
Be sure to request a specialist to move the device.
When moving the device by necessity within the same floor without steps, perform the following
procedure.
When moving the device, unlock the caster stoppers.
• When moving the device, take care not to apply excessive shock to it.
• After moving the device, be sure to lock the caster stoppers.
Method of moving the device
When moving the device, it must be held up by
at least two persons as illustrated at right.
The cover of the device may break if it is pressed hard.
Locking/unlocking the casters
When moving the device, unlock each of the
casters by pushing up the stopper.
Each of the casters on the pedestals is provided with a
stopper.
When installing the device, push down the stoppers to lock
the casters.
- 1.3 -
Unlock
Lock

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jv3 s series

Table of Contents