Set Alternate Tftp Field - Cisco 8811 Administration Manual

Configure Network Settings

Set Alternate TFTP Field

Procedure
Step 1
Scroll to the Alternate TFTP option.
Step 2 Press Edit.
Step 3 Press Yes if the phone should use an alternative TFTP server.
Step 4 Press No if the phone should not use an alternative TFTP server.
Set TFTP Server 1 Field
Procedure
Step 1 Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the
phone). If the CTL and ITL files both exist, unlock either file.
Step 2 If DHCP is enabled, set the Alternate TFTP option to Yes.
Step 3 Scroll to the TFTP Server 1 option, press Select, and enter a new TFTP server IP address.
Step 4 Press Apply then press Save.
Set TFTP Server 2 Field
Procedure
Step 1 Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the
phone). If both the CTL and ITL files exist, unlock either of the files.
Step 2 Unlock network configuration options.
Step 3 Enter an IP address for the TFTP Server 1 option.
Step 4
Scroll to the TFTP Server 2 option, press Select, and enter a new backup TFTP server IP address. If there is
no secondary TFTP Server, you can use Delete to clear the field of a previous value.
Step 5 Press Apply and then press Save.
Set Up Phone to Use DHCP
To enable DHCP and allow the DHCP server to automatically assign an IP address to the Cisco IP Phone and
direct the phone to a TFTP server, perform these steps:
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
64