Calibrating The Iv-S30J - Sharp IV-S30J User Manual

Setting the Input/Output Conditions

16-8 Calibrating the IV-S30J

The IV-S30J calibration can be adjusted, e.g. "1 pixel = 1 mm", and the data can be displayed as
actual dimensions.
How to display the CALIBRATION setting screen
1) Select "MAIN COND" and then "OBJECT
TYPE COND."
2) On the "OBJECT TYPE COND" screen, move the cursor to any "TYPExx" that you want to
calibrate, and press the SET key.
3) Move the cursor to the "OBJ-TYPE I/O" line
and press the SET key.
4) On the "OBJ-TYPE I/O" setting screen, move
the cursor to the "
press the SET key twice, to bring up the sub-
menu.
Note: Depending on settings for the "
5) Set the calibration details on the
"CALIBRATION" setting screen.
Put a ruler in the camera's field of view .
16
When "MANUAL" is selected on the "CALIBRATION" line
1. Move the cursor to "
CALIBRATION" line and
CCD START" and " SERIAL
OUTPUT" items, the number of the
"CALIBRATION" line will vary between
and .
CURSOR1-COORD" and press the SET key.
MAIN MENU
IVS3
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE01
TYPE(NEW)
OBJ-TYPE I/O SCREEN SAVE
1TRIG CCD START
BIN
2CCD TRIG COND
(TO NEXT SUB-MENU)
3
1/00060(1/30~1/10000)
4
TRIG
5
6
1(1~2)
7
8
(TO NEXT SUB-MENU)
SCREEN SAVE
1CURSOR1-COORD
SET (256.240)
2CURSOR2-COORD
SET (256.240)
3
000.00
4
5
CBP 000.0000 mm
CBM 000.0000 PIXEL
16-28
F C1 BRT
F C1 BRT
1TRIG CCD START
2CCD TRIG COND
3
4
5
6
7
8
F C1 BRT
F C1 BRT