Sharp IV-S30J User Manual page 53

Setting Measurement Conditions
(2) Horizontal/vertical lines
Line type
Solid lines
3
Dotted lines
How to set horizontal lines
The following items on the settings menu can be used to define lines: MOVE, S.PT, E.PT.
Shown here is an example of how to define a solid line.
1. Move
- Up key
2. Specifying the starting point
- Left key
(The up and down keys function the
same as in the move item)
How to set vertical lines
1. Move
- Up key
2. Specifying the starting point
- Up key
(The left and right keys function the
same as in the move item)
To register reference images
To register reference images, the system should be in the "Freeze" mode.
See page 1-10.
Image processing used
Gray scale search
Positional deviation measurement (gray scale search),
(reference image)
degree of match inspection, lead inspection (criteria search).
Edge of an area
Lead inspection
detection
Positional deviation measurement (gray scale search),
Gray scale search line
degree of match inspection, lead inspection (criteria search).
detection
- Down key
- Right key
- Down key
- Down key
Measurement programs
- Left key
3. Specifying the ending point
- Left key
(The up and down keys function the
same as in the move item)
- Left key - Right key
3. Specifying the ending point
- Up key - Down key
(The left and right keys function the
same as in the move item)
3-6
- Right key
- Right key