Sharp IV-S30J User Manual page 119

WINDOW
Select a window type. On the popup menu,
move the cursor any of "NUM-OF-
MASK1,2,4," "BINARY-IMG-MASK," or
"POLYGON," and press the SET key to
select the item.
NUM-OF-MASK 1
NUM-OF-MASK 2
NUM-OF-MASK 4
BINARY-IMG-MASK
POLYGON
REGISTER NO.
Select register number to measure. Number of selectable registers varies with window shape
selected.
N U M - O - F M A S K 1
N U M - O - F M A S K 2
N U M - O - F M A S K 4
I B M A R Y I - M G - M A S
P O L Y G O N
To save the measurement conditions using a different register number, press the SET key and
highlight the number. Change this number by pressing the up and down arrow keys.
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( BIN AREA COND)
Register setting conditions are shown for each register number. Circles mean that "REGISTER
EXIST" has set to "YES."
Æ Setting (display) of binary area conditions
REGISTER NO.
4BIN AREA COND
Bring one mask area inside the measuring area.
Bring two mask areas inside the measuring area.
Bring four mask areas inside the measuring area.
Select this item if the captured image is other than a rectangle, circle, or
ellipse. This function masks the captured image using a stored binary
image.
-
You can manually create any freeform polygon for the measurement area.
0 o t 1 5
0 o t 7
0 o t 4
K 0 o n y l
0 o n y l
When item "3REGISTER EXIST" is
No setting set to "YES," a circle is displayed.
7-3
Area Measurement by Binary Conversion
MEA-CND SCREEN COND SAVE
1
NUM-OF-MASK 1
2REGISTER NO.
00(0 15)
3REGISTER EXIST
NO
REGISTER NO.
4BIN AREA COND
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
NUM-OF-MASK 1
NUM-OF-MASK 2
NUM-OF-MASK 4
BINARY-IMG-MASK
POLYON
7