Sharp IV-S30J User Manual page 33

(2) Output monitor switching by parallel input
On the operation screen, select "MAIN-COND" ->
"SYS-CND" -> "I/O CONDITIONS" in that order.
Move the cursor to the "
using up/down arrow keys and press the SET key.
Select "CHNG-IMG-OUT-CAM" on the popup
menu that is displayed and then press the SET key.
Every time the X6 signal is turned from OFF to
ON, the selected camera display will be changed.
CAM1 CAM2
whole screen whole screen
The display example of the operation screen is
the same as in section (1).
Setting the Operating and System Conditions
PARALLEL INP X6" line
CAM1&2(HORIZ)
divided screen
2-3
I/O CONDITION SCREEN COND SAVE
1MEAS INP I/F
PARALLEL+SERIAL
2OUT I/F(PARAL.)
NO
3MANL TYPE CHNG NO
4PARALLEL INP X5 EXT-INP
5PARALLEL INP X6 CHNG-IMG-OUT-CAM
6STROBE OUT
NO
7'READY'ON
CAPTURE COMPLETE
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
2
EXT-INP
CHNG-IMG-OUT-CAM
CAM-MEAS
2 IMAGES