Final Numerical Calculations - Sharp IV-S30J User Manual

14-3 Final numerical calculations

Final numerical calculations can be set at item "FINAL NUM-CALC" on the menu tree.
The setting procedure, error output settings, calculation sequence and parallel output based on the
output conditions are exactly the same as those used for item "14-2 The individual numerical
calculations for each measuring program."
How to display the final numerical calculation
screen.
Open the sub menu for "TYPExx" on the menu tree
and select "FINAL NUM. CALC." Then press the
SET key.
Settings on the final numerical calculation screen.
The display positions of each item selected are the
same as in section "14-2 The individual numerical
calculation for each measurement program."
See the next page for the display details.
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
NUMERIC CALC SCREEN COND SAVE
[N00-N07]
CHG-CALC
1RUN A TEST
(SET KEY)
TYPE FORMULA
MEAS-CAL-RESULT[N]
A-CAL-RESULT[AN]
NUM-CAL[NC]
CNST[C]
NO
SET=EXEC ESC=BACK SEL=CHNG IMG TRG=FUNC
14-9
Numerical Calculations
F C2 BRT
F C1 BRT
OBJECT TYPE
CNST
SUM
AVG
CBP
CBM
DEL
14