Connection And Installation Method; [ 1 ] When Iv-S51M Is Directly Connected To Lcd Monitor (Iv-08Mp) - Sharp IV-S51M Instruction Manual

3. Connection and Installation Method

This section describes how to connect IV-S51M and LCD monitor. IV-S51M and LCD monitor can be
directly connected or connected using the monitor cable.

[ 1 ] When IV-S51M is directly connected to LCD monitor (IV-08MP)

When IV-08MP is directly connected, follow the instructions below to connect the monitor to
IV-S51M.
(Note) When IV-08MP and IV-S51M are not directly connected and used separately, the work
explained here are not be required.
Remove the connector cover from the main housing of IV-S51M.
Fit the tab A of the IV-08MP in the notch part of the IV-S51M.
To connect them, press the IV-S51M in place in the direction of the arrow so that the tab B is fit into
the notch part. Make sure that the connectors of both units are firmly connected.
IInsert two (2) main housing angle brackets (supplied with IV-08MP) as indicated below and fix
them with two (2) securing screws (supplied with IV-08MP).
Connector cover
Tab A
Tab B
3 - 1
Securing screws