Sharp IV-S30J User Manual page 170

Multiple Degree of Match Inspection
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 14: Numerical calculations."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the
popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 16: Setting the Input/Output Conditions.
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be displayed on
the screen.
Final evaluation result
Measuring time
Measuring program number
Register number
Number of detected images
Numbered in the order detected (range)
Degree of match
Light level (average/absolute value)
Detected coordinate
(TYPE00)
OK
MEAS XXXXms
MEASUREMENT 1 MULTI-MATCHES
REG.NO (0~3)
K=004 OK
DTECT NO.000(000~003)
M=+09870 OK
G=228.3
X=236.0
Y=163.0
X0 6 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
12-8
F C1 BRT
V*.**
READY