Setting The Register Conditions For Edge Detection - Sharp IV-S30J User Manual

REFIMG
Move the cursor to the function menu on the
REG COND screen by pressing the TRG/BRT
key. Move the cursor to "DETAIL." Press the
SET key on the "REFERENCE IMG" line in the
popup menu. The white square on the left will
change to a black square. Then, the "
IMG" item will appear on the screen.
- You can use the same procedures to show
"DTECT CRD" (detection coordinates) and
"CONTR.PIXL" (contraction pixels) on the
screen.
On the " REF IMG" line, select a reference
image from the reference images already
registered.
Ex : 015 (000 to 026)
Select reference image No. 15 from the 26 registered reference images (000 to 026).
DTECT CRD (detection coordinates)
Select whether to use the detection coordinates as the center of the reference area or to allow the
point to be set freely.
CONTR.PIXL (contraction pixels)
When "RECTANGLE" was selected at "
" X-LINE" or "Y-LINE" was selected, you can select items 1 or 2 below.
1: Search the image in units of 2 pixels.
2: Search the image in units of 4 pixels.
3: Search the image in units of 8 pixels.

[2] Setting the register conditions for edge detection

MEAS SHAPE (MDL 1)
Select a measurement shape.
RECTANGLE
LINE (straight line)
CIRC-L (circle)
ELIP-L (ellipse)
NO ARTF/ARTIF: Select whether to detect edge
SEARCH AREA
Select " SEARCH AREA (MDL1)" and press the
SET key to go to the setting screen.
REF
MEAS SHAPE," you can select items 1 to 3 below. When
Select a pattern to be
used for image
processing.
See pages 3-4 to 3-8.
or not with average density.
See page 3-15.
4-7
Positional Deviation Measurement
REG COND SCREEN COND SAVE DETAIL
1
0(0 7)
2MEAS SHAPE (MDL0)
RECTANGLE
3REFIMG ARE (MDL0)
SET (224.208) (287.271)
4SEARCH ARE (MDL0)
SET (216.200) (295.279)
5REFIMG
(MDL0) 001(000~001)
6DTECT CRD (MDL0)
CENTER (250.229)
7CONTR.PIXL (MDL0)
1
Make to
the respective item will be added to
the "REG COND" menu.
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
REG COND SCREEN COND SAVE
1
0(0 7)
2MEAS SHAPE (MDL1)
RECTANGLE (NO ARFT)
3SEARCH ARE
(MDL1) SET (224.208) (287.271)
4DTECT MODE (MDL1)
CHNG POINT
5SEARCH DIR(MDL1)
HORIZ (
6THRESHOLD(MDL1)
SET (D:050 E:2 F:04)
7REF COORD(MDL1)
SET KEY(512.480)
SEL=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
DTECT CRD
CONTR.PIXL
on the popup menu,
4
F C1 BRT
RECTANGLE (NO ARFT)
RECTANGLE (ARFT)
LINE
CIRC-L
ELIP-L
CHNG POINT
DRK
DRK
CENT(
CENT(DRK
HORIZ (
HORIZ (