Sharp IV-S30J User Manual page 167

Set the coordinates for "
LO.R." The rectangle inside the solid lines is
the reference image.
Register a reference image
After setting the reference image area, store
an image in the controller as a reference
image.
Select " REFERENCE IMG" using the up/
down arrow keys and select "REG" from the
popup menu.
Select a reference image
Move the cursor to the function menu on the
"REG COND" screen by pressing the TRG/
BRT key. Move the cursor to "DETAIL."
Press the SET key on the "REFERENCE
IMG" line in the popup menu. The white
square on the left will change to a black
square. Then, the "
item will appear on the screen.
On the " REFERENCE IMG" line, select
a reference image from the reference
images already registered.
Ex : 015 (000 to 026)
Select reference image No. 15 from
the 26 registered reference images
(000 to 026).
UP.L" and "
REG COND
1
2REFERENCE IMG
3REF-IMG AREA
4SEARCH AREA
5DTECT COORD
6CONTR.PIXL (MDL0)
REFERENCE IMG"
7MATCH LVL(CONTR)
8MATCH LVL
12-5
Multiple Degree of Match Inspection
RECTANGLE RESET RETURN
MDL 0
1
2
3MOVE
4REFERENCE IMG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE RESET RETURN
MDL 0
1
2
3MOVE
4REFERENCE IMG
SET=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
SCREEN COND SAVE DETAIL
0(0 3)
001(000~001)
SET (191.210) (255.273)
SET (216.200) (295.279)
CENTER (223.241)
3
+05000
+07000
Make to
the respective item will be added to
the "REG COND" menu.
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
X:224 Y:208
F C1 BRT
CONTRAST SRCH
REG
DISP
X:224
F C1 BRT
DETECT CRD
CONTR.PIXL
on the popup menu,