Select "Yes" Or "No" For Output Data - Sharp IV-S30J User Manual

[2] Select "YES" or "NO" for output data

Select "YES" or "NO" on the following menu screens that are displayed as "locked" screens to output
serial data. See the next page for instructions about how to lock the screen.
On any condition setting screen, press the TRG/BRT key and the cursor will move to the upper function
menu. Select "SCREEN" and press the SET key. A popup menu will appear. Select "SERIAL
OUTPUT" and press the SET key.
- The "EVALUATION COND" screen for
individual measurement program
EVALUAT COND SCREEN SAVE
[SERIAL OUTPUT]
1X COORD(MDL0)
2Y COORD(MDL0)
3x DEVIATE(MDL0)
4y DEVIATE(MDL0)
5MATCH LVL(MDL0)
6ANGULAR DEVIATE
7X COORD(MD1)
8Y COORD(MDL1)
9x DEVIATE(MDL1)
0y DEVIATE(MDL1)
qMATCH LVL(MDL1)
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
(When measuring positional deviation)
- The "DIST&AGL COND" screen
DIST&AGL COND SCREEN SAVE
[SERIAL OUTPUT]
1
DISTANCE EVALUATION
(To measure an object's "distance" on the distance and angle condition menu)
F C1 BRT
NO
NO
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
F C1 BRT
NO
16-27
Setting the Input/Output Conditions
- The "NUMERIC CALC" or "FINAL NUM.
CALC" screen for individual measurement
program
NUMERIC CALC SCRREN SAVE
[SERIAL OUTPUT]
1
OUTPUT
NO
(When the numerical calculation condition
menu is displayed)
- When the serial output setting is "NO," no data
(block 0) will be output (the space will be filled by
the next item).
F C1 BRT
16