Sharp IV-S30J User Manual page 18

Displays the software version.
Displays the measurement time currently assigned.
(Only when changing the object type)
Time to change CCD exposure time
object type (Shutter operation time)
- Serial communication time is not included.
- Set the controller as follows to reduce the measurement time.
1. Increase the shutter speed.
2. Select the "partial" image capture feature for the CCD.
3. Select "NO" for the measurement results display (message display, pattern display, and binary
image display).
Display setting details of each measurement.
MEASURE 0
Measurement Camera 1 or
numbers from 0 to 4 camera 2
Displays the status of input relays X0 to X6: OFF [
Displays the status of output relays Y0 to Y7: OFF [
Displays the status of the ready output: OFF [
The menu bar at the bottom has two rows. When this menu is selected, the second row will appear.
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
MNU-CHG CHG-C1 CHG-C2 MANL-MEAS SHORTCUT
The details of each item on this menu bar are shown on the next page.
Actual measurement time
CCD image
capture time processing time
CAM1 NO
Measurement
program name
], ON [
1-11
Setting and Operating Outline
Image Result output
time
], ON [ ].
], ON [ ].
].
1