Image Capture - Sharp IV-S30J User Manual

Setting the Operating and System Conditions

[2] Image capture

In item " CAPTURE IMG" on the "TYPE RUN COND"
screen, specify the range which will be captured during
operation.
2
CAPTURE IMG
PARTIAL-IMG
(partial image)
WHOLE-IMG
(whole image)
NO
(no image)
Example of a comparison of the capture times
- When "WHOLE-IMG" is selected: 33.3 ms
- When the "PARTIAL-IMG" is selected (when there are 240 scan lines): 16.6 ms
- An image of the specified lines, required for inspection or measurement,
will be captured.
- The processing time is shorter than in the "WHOLE-IMG" mode.
- A whole image will be captured, irrespective of the window settings for
inspection or measurement.
- This mode is used to monitor portions of an image outside the window
set up for inspection or measurement
- No image will be captured during operation. Measurements will be
carried out with an image being displayed.
- This mode only used to carry out measurements on an image
transmitted from a personal computer to the IV-S30J.
Capture whole image
480 lines
Capture partial image
240 lines
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
Description
2-4
F C1 BRT
CAM1
PARTIAL-IMG
PARTIAL-IMG
WHOLE-IMG
YES(NUMERIC)
NO
YES
YES
YES
YES
NO
NO
NO
NO