Sharp IV-S30J User Manual page 108

Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 14: Numeric calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the
popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 15: Set the Input/Output Conditions."
Display the inspection results
Return to the operation screen and press the TRG/BRT key. The inspection results will be displayed on
the screen.
Final evaluation result
Measuring time
Measurement program number
Registration number
Degree of match with the
reference image for model 0
Detection coordinates for model 0
Average gray level in the
reference image for model 0*
Degree of match with the
reference image for model 1
Detection coordinates for model 1
Average gray level in the
reference image for model 1*
When a 2 point search has been specified
(TYPE00)
OK
MEAS XXXXms
MEASUREMENT 1 CHK-DEG-MATCH
REGISTER N00(0~15)
M0=+09878 OK
X0= 288.0 OK
Y0= 190.0 OK
G0= 023.0 OK
M1=+09306 OK
X1= 389.0 OK
Y1= 355.0 OK
G1= 023.0 OK
X0 6 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
5-9
Degree of Match Inspection
F C1 DRK
V*.**
Model 0
Model 1
SERIAL NO.
8F053G26
MODEL
IV - S30J
READY
5