Sharp IV-S30J User Manual page 191

(4) Operation on the "OUTPUT COND" screen
1. On the "MEA CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "OUT" item and press the SET
key.
2. Select the "INPUT00" line and row 0. Then
press the SET key. Select "NUM-CAL[NC]"
from the popup menu and press the SET key.
3. Move the cursor to the "LOGIC" line on the
same row and press the SET key. Select "
from the popup menu and press the SET key.
The logical condition will be displayed in the left most column of the LOGIC row under INPUT 0.
[PAGE0]
INPUT0
LOGIC
- N00 refers to the N00 calculation result, that was entered on the "NUMERIC CALC" screen.
4. Select the "INPUT00" line and row 1. Then press the SET key. Set "NUM-CAL[NC]" using the
same procedures as in Steps 2 and 3 above. Since "N00" will appear first, press the SET key
and change "N00" to "N01," using the up/down/left/right arrow keys.
[PAGE0]
INPUT0
LOGIC
5. Move the cursor to the "OUT" row using the left and right arrow keys, and press the SET key.
Select "AUX-RLY" from the popup menu and press the SET key.
6. A list of auxiliary relays will be displayed. Select "C000" using the up and down arrow keys and
press the SET key.
The output coil for INPUT 0 will be displayed.
[PAGE0]
INPUT0
LOGIC
7. Press the ESC key to move to the "MEA-CND" setting screen.
MEA CND SCREEN COND
1DTECT PRECISION STANDARD
2REGISTER NO.
00(0~15)
3MODE
1P-SCH
4SEARCH
YES
5MATCHING
AVG-GRAYS
REGISTER NO.
6MDL 0
7MDL 1
OUTPUT COND SCREEN SAVE
0 1
INPUT00
LOGIC
INPUT01
LOGIC
INPUT02
LOGIC
INPUT03
LOGIC
"
INPUT04
LOGIC
INPUT05
OUTPUT
OUTPUT
C000
OUTPUT
C001
C002
C003
C004
C005
C006
C007
14-13
Numerical Calculations
SAVE F C1 DRK
IMG PRE-PROC
REG COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
F C1 BRT
Column No.
OUT
2 3 4 5 6 7
AUX-RLY Use place
MEAS1/OUTPUT COND
NO
NO
NO
NO
NO
NO
NO
14