Binary Image Display - Sharp IV-S30J User Manual

[5] Binary image display

Select "YES" or "NO" to display a binary image on the
operation screen.
Note: When "CAM1&2" is selected on the "MONITOR
OUTPUT" (page 2-2), the binary image display
cannot be selected.
- When "NO" is selected on the "
DISPLAY," the " SHOW BINARY IMG" item will
not appear.
SHOW BINARY
IMG
A binary image will be displayed on
YES
the operation screen.
A binary image will not be displayed
NO
on the operation screen.
Display examples
- When "YES" is selected for the "5SHOW BINARY IMG"
(TYPE00)
MEAS XXXXms
MEASUREMENT1 CNT-BIN-OBJ
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
PATTERN
Description
F C1 L
VX.X
2-7
Setting the Operating and System Conditions
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
- When "NO" is selected for the "5SHOW BINARY IMG"
MEAS XXXXms
MEASUREMENT1 CNT-BIN-OBJ
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
F C1 BRT
YES
NO
F C1 L
VX.X
2