Sharp IV-S30J User Manual page 236

3. The " SET SERIAL BLOCK" line will appear.
Select this line and press the SET key. Enter the
block No., measurement No. and camera No. of
the measurement data to be output, using the left,
right, up and down keys.
- Specify a block number to be returned in
addition to block 0 (00). If block 00 is specified,
data from block 00 will not be returned a second
time. After the settings are complete, press the
SET key.
Setting the Input/Output Conditions
OBJ-TYPE I/O SCREEN SAVE
1TRIG CCD START
NO
2
1/00060(1/30~1/10000)
3
4
5
1(1~2)
6
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
16-25
F C1 BRT
16