Sharp IV-S30J User Manual page 166

Multiple Degree of Match Inspection
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEAS CND" setting screen, move
the cursor to the "
press the SET key. The cursor will move into
the table. Move the cursor to the "S" column
and press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
2) On the "MEAS CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG COND" item and press
the SET key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG
COND" item will appear. Move the cursor to
this item and press the SET key.
Register a reference image
After setting the reference image area, store
an image in the controller as a reference
image.
Select "
down arrow keys and select "REG" from the
popup menu.
DETECT OBJECT" and
REF-IMG AREA" using the up/
MEAS CND SCREEN COND SAVE
1DTECT PRECISION
STANDARD
2
0(0~3)
3
NO
4MATCHING
AVG-GRAYS
5DETECT ORDER
SCAN-ORDER
6
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01(MULTI MATCHES)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
REG COND SCREEN COND SAVE DETAIL
1
2REF-IMG AREA
3SEARCH AREA
4MATCH LVL(CONTR)
5MATCH LVL
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
12-4
F C1 DRK
IMG PRE-PROC
REG-COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
F C1 BRT
1REGISTER NO.
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
F C1 BRT
0(0 3)
SET (224.208) (287.271)
SET (216.200) (295.279)
+05000
+07000
Object to measure
Search area
Search direct