Changing A Call Diversion From A Distant Phone - Tenovis Integral T3 User Manual

Diverting calls

Changing a call diversion from a distant phone*

You can call your PBX system from an external telephone in order to set up or change a call
diversion for your telephone or other telephones. This is possible from any telephone with
DTMF suffix dialling.
Select the subscribers whose call diversion you want to change:
external telephone.
Enter the tie line discrimination code of your system, e.g. 89. You will hear a dial tone
as confirmation.
Enter the call number of the subscriber for whom you want to change the call
diversion, e.g. 6055.
Enter your PIN, e.g. 1234.
Set up, change or deactivate the call diversion now:
Setting up or changing a call diversion:
Enter a code for "Activate follow-me", e.g. star, 14.
which you want to divert calls, e.g. 00897543. An acknowledgement tone sounds after a short
time for confirmation.
Deactivating a call diversion:
Enter the code for "Deactivate follow-me", e.g. hash, 14.
• "Changing a call diversion from a distant phone" must be enabled by Tenovis Service.
The service department will also tell you the tie line discrimination code and the PIN.
• In some cases, you will only able to set up the call diversion from certain pre-defined
telephones. The service department will provide with the corresponding information.
Dial the call number of your PBX system, e.g. 069 7505, from the
Enter the system's external line code and the call number to
Making calls as usual
43