Information About Partners On Display Keys - Tenovis Integral T3 User Manual

Information about partners on display keys

Information about partners on display keys

By default, all partners are assigned to display keys so that you can see the activities of each
partner in the respective display fields. If there are less than five partners, all partners are
shown on display key level 1. If there are more than 4 partners, the partners 5 to 8 are shown
on the second display key level, and (if necessary) partners 9 and 10 on the third level. If there
are more than 4 partners, "Level 1" and "Level 2" are assigned to the top two function keys of
the right-hand row of function keys. If there are more than 8 partners, "Level 3" is assigned to
the third function key of the right-hand row of function keys. This is only the case however, if
the function has not already been assigned to another key. The respective function key LED
flashes rapidly as soon as a partner makes a call on the respective display key level. This key
enables you to switch to the corresponding display key level.
The following information is shown in the display fields.
Partner "Behrma" is available
The partner "Behrma" is being called.
(name and bell flashing alternately)
Partner "Behrma" is being called by two different callers
simultaneously.
(name and two bells flashing alternately)
Partner "Duglas" is busy.
(name is displayed inversely)
Partner "Duglas" is called while he/she is busy
(inverse name and bell flashing alternately).
Partner "He" has set up a partner diversion to partner "Kr"
Telephoning with partners*
69