Cti/Audio-Link (T3 Only); Setting A Cti Application; Setting An Auxiliary Device - Tenovis Integral T3 User Manual

CTI/Audio-Link (T3 only)

CTI/Audio-Link (T3 only)

Setting a CTI application

The "TAPI" CTI application is set on your telephone by default. This means that you do not
need to make any further settings in order to run a TAPI application (e.g. Tenovis Com4Tel).
You have to proceed as follows however, if another CTI application has been connected:
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. CTI/Audio link Port 1 (if the CTI/Audio-Link
has been connected to port 1).
Confirm your selection.
Scroll to the CTI application (TAPI) menu item.
Confirm your selection.
Scroll to the Other CTI menu item.
Confirm your selection. You now have to use the "CTI setup" menu item to make additio-
nal settings for this CTI application, such as "Baud rate" or "Dialling mode".

Setting an auxiliary device

Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. CTI/Audio link Port 1 (if the CTI/Audio-Link
has been connected to port 1).
Confirm your selection.
Scroll to the desired menu item, e.g. Headset (off).
Confirm your selection.
Make the appropriate settings, e.g. at handset.
Confirm your selection.
Links*
155