Call Back; Call Charges; Call Diversion - Tenovis TS 13 Operating Instructions Manual

Menu items on the display
Audio / Contrast
Adjust the loudspeaker volume, the sound of various tones and the con-
trast.
Auto. postdial/DTMF (! p. 60)
Your telephone has been set as standard so that all keys pressed during a
connection are transmitted as tones. You can also deactivate this function
and initiate the subsequent tone dial manually during a connection.
B
Baud rate (AT)
You can set the Baud rate of your telephone for data transfer here. The
values 1200, 2400, 4800 and 9600 are available.
The menu item is only displayed when the AEI mode of operation is set to
"AT command".
C

Call back

When the subscriber you have called is busy, you can receive a signal indi-
cating when the line is free again.
Your telephone will ring and as soon as you lift the handset, the other line is
called automatically via the telephone system.
This is only possible for calls within your system.

Call charges

You can select whether this is to be done in currency units, Euros, or call
units: for the previous call and the current sum of all calls.
Call charges on
Switch on the call charge recording for cost--incurring connections.

Call diversion

You can divert calls to another telephone within your system.
Depending on the telephone system, you can also divert calls to an exter-
nal telephone.
• Functions which are labelled with - are not installed as standard on your phone.
When in doubt, look it up
i
83